Fenghuang Maglev | China

Fenghuang Maglev is a medium-low speed maglev rapid transit line. Since maglev trains do not have wheels, traditional wheel-based detection systems cannot be directly applied to maglev traffic engineering. Therefore, to ensure that the wheel detection system functions correctly and is able to accurately detect the position of the maglev train, the project is implemented with detection plates mounted on the bottom of the maglev train. Fenghuang Maglev is the first tourist maglev line in China.

The Fenghuang Maglev line can operate at speeds up to 100 km/h. Its first phase is 9,12 km long with 4 stations and has been put into the test operation in May 2022.

Due to the signal system requirements of the operation mode of medium and low speed maglev trains, the train’s position must be detected in a timely and reliable way. However, the levitation of the train is achieved due to the existence of electromagnetic forces between the electromagnet and the track which ensures that the train runs without any physical contact, which is one of the pain points in detecting the axles of the train. Moreover, traditional wheel-based detection systems cannot be directly applied to maglev traffic engineering.

To overcome these issues, we have used the Frauscher Advanced Counter FAdC® – being the first maglev line in the world using this technology - which has obtained the CENELEC SIL 4 Certification, providing a protocol-based fully electronic interface. The Frauscher Wheel Sensor RSR180 was also used due to its ability to withstand electromagnetic interference disturbances and flexible installation methods. Frauscher communication boards which support the Railway Signal Safety Protocol (RSSP) protocol have been implemented. This protocol has been widely applied in the CBTC of passenger dedicated lines in China.

Flexible and universally applicable interfaces

The FAdC® provides a protocol-based fully electronic interface. Its functional modularity and flexible scalability enable the unification of small central facilities and complex system operations.

Secure and reliable operation

Fenghuang Maglev is the first maglev line in the world to use the Frauscher Advanced Counter FAdC®. The FAdC® is our new generation axle counting system, which has obtained the CENELEC SIL 4 Certification.

Resistance to magnetic flux leakage

The Frauscher Wheel Sensor RSR180 was chosen for this project due to its ability to withstand electromagnetic interference disturbances. Besides this, the RSR180 also has a flexible installation method.

Project details
Operator
Hunan Maglev Group Co.
Country or region
China
Segment
Main Lines
Axle Counting
FAdC® with COM-RSSP
Wheel Detection
RSR180 (detecting plates instead of wheels)
Application
Track vacancy detection
Year
2022
Similar projects

This might also interest you

Frauscher Train Detection Metro Warsaw

Metro Warsaw | Poland

Metro Warsaw was looking for an alternative to track circuits for the line M2, to increase the availability of public transport by using reliable signalling technology. In the end, the operator even decided to replace the existing track circuits on line M1 with the Frauscher Axle Counter ACS200.

Dillinger Hütte | Germany

A new ladder track was required to provide more parking tracks in the steel plant. At the same time, the layout of the dead end tracks were optimised and the efficiency of the whole depot improved by installing the Frauscher Advanced Counter FAdCi in combination with the wheel sensor RSR180. With the implementation of the Frauscher Diagnostic System FDS, the overall maintenance costs can be significantly reduced.

Edmonton Metro Line | Canada

The Edmonton Metro Line was experiencing significant issues with its newly installed Communications Based Train Control (CBTC) signalling system, which did not perform to the operator‘s expectations. The city was forced to run an incomplete schedule with reduced train speed and frequency which negatively affected commuters and the city of Edmonton in general. Finally in 2019, the operator decided to install a new system in cooperation with Frauscher.