Fenghuang Maglev | China
train-detectionChina

Fenghuang Maglev | China

Operator
Hunan Maglev Group Co.
Country
China
Segment
Main & Regional Line
Application
Track Vacancy Detection
Products
RSR180, FAdC®
Protocols
Proprietary protocols
Year
2022
Scope of project
67 detection points

Fenghuang Maglev is a medium-low speed maglev rapid transit line. Since maglev trains do not have wheels, traditional wheel-based detection systems cannot be directly applied to maglev traffic engineering. Therefore, to ensure that the wheel detection system functions correctly and is able to accurately detect the position of the maglev train, the project is implemented with detection plates mounted on the bottom of the maglev train. Fenghuang Maglev is the first tourist maglev line in China.

The Fenghuang Maglev line can operate at speeds up to 100 km/h. Its first phase is 9,12 km long with 4 stations and has been put into the test operation in May 2022.

Due to the signal system requirements of the operation mode of medium and low speed maglev trains, the train’s position must be detected in a timely and reliable way. However, the levitation of the train is achieved due to the existence of electromagnetic forces between the electromagnet and the track which ensures that the train runs without any physical contact, which is one of the pain points in detecting the axles of the train. Moreover, traditional wheel-based detection systems cannot be directly applied to maglev traffic engineering.

To overcome these issues, we have used the Frauscher Advanced Counter FAdC® – being the first maglev line in the world using this technology - which has obtained the CENELEC SIL 4 Certification, providing a protocol-based fully electronic interface. The Frauscher Wheel Sensor RSR180 was also used due to its ability to withstand electromagnetic interference disturbances and flexible installation methods. Frauscher communication boards which support the Railway Signal Safety Protocol (RSSP) protocol have been implemented. This protocol has been widely applied in the CBTC of passenger dedicated lines in China.

Flexible and universally applicable interfaces

The FAdC® provides a protocol-based fully electronic interface. Its functional modularity and flexible scalability enable the unification of small central facilities and complex system operations.

Secure and reliable operation

Fenghuang Maglev is the first maglev line in the world to use the Frauscher Advanced Counter FAdC®. The FAdC® is our new generation axle counting system, which has obtained the CENELEC SIL 4 Certification.

Resistance to magnetic flux leakage

The Frauscher Wheel Sensor RSR180 was chosen for this project due to its ability to withstand electromagnetic interference disturbances. Besides this, the RSR180 also has a flexible installation method.

Similar Projects
This might also interest you
1/5
train-detectionKazakhstan

FAdC® at Uglerudnaya Station | Kazakhstan

AcelorMittal is the operator of the Uglerudnaya industrial railway station, located in Temirtau, Kazakhstan. The station features a total of 56 switches and 52 track sections to enable the smooth flow of train traffic. To ensure the safety of all trains, an interlocking system is used to establish secure routes for incoming, outgoing, and passing trains. This requires effective traffic management and a dependable train detection system to detect the presence of trains on the tracks.
train-detectionUnited Kingdom of Great Britain and Northern Ireland

The Borders Railway Project | United Kingdom

From Shawfair to Tweedbank, the Borders Railway rail route underwent significant renovations after 45 years of disconnect due to Beeching cuts. Our Frauscher UK & Ireland team were involved in providing innovative solutions for train detection for a section of the Borders Railway route.
train-detectionSpain

Three-rail Castellbisbal | Spain

The dual-gauge system of the Spanish railway network is quite challenging in terms of track vacancy detection: Wheel sensors must be installed on two rails next to each other in tight spaces and have to detect axles reliably on the respective rail. Frauscher developed a solution which copes also with the complexity of different interlocking technology in the stations along the line.
data-transmissionIndia

South Central Railway | India

The Vijayawada Division of Indian Railways introduced a new train detection system with data transmission functionality to overcome the challenges of the existing BPAC and conventional quad cable-based systems. Frauscher implemented the Frauscher Advanced Counter FAdC®, featuring full redundancy, advanced reset mechanisms and remote diagnostics. This upgrade delivers significant cost savings and enhanced system availability for the operator.
train-detectionUnited Kingdom of Great Britain and Northern Ireland

London to Corby | UK

The project was part of Network Rail’s Midland Main line electrification programme and involved re-signalling between Bedford and Kettering. The goal is the reduction of industry costs and environmental benefits through lighter rolling stock, reduced fuel costs and lower carbon emissions.